Stationary Batching Plant DPE 60 4A Aggregate Hoppers: Rack with four aggregate hoppers, each with a capacity of 15 m³ (19.6 yd³). Equipped with T300 vibrators of 0.33 HP (0.25 kW) for the sand hoppers. Includes pneumatically actuated clam-type discharge gates for aggregate transfer to the weighing belt, foldable upper extensions, and platform for handling the power cabinet. Weighing Belt: Horizontal conveyor belt, 24” wide, with flat rubber belt, driven by a 15 HP (11.2 kW) gearmotor, brand Sumitomo or SEW, with chain coupling. Includes carrying, return, and self-aligning rollers; drive drum and self-cleaning tail drum with tensioning system; material guides and lubrication points for pedestal and tension bearings. Includes lateral and rear safety guards. Equipped with material guide hopper with T300 vibrators of 0.33 HP (0.25 kW) and weighing system with load cells by Rice Lake or Revere Transducers, with summing box for aggregate dosing. Inclined Belt: Inclined conveyor belt, 24” wide, with flat belt, driven by a 15 HP (11.2 kW) gearmotor, brand Sumitomo or SEW, with chain coupling. Includes carrying, return, and self-aligning rollers; drive drum and tail drum with tensioning system; material guide at the belt inlet, lubrication points for pedestal and tension bearings, and aggregate discharge chute toward the mixer. Production capacity: 55–60 m³/h (71.9–78.5 yd³/h). Cement Weighing Scale: Cement scale with a capacity of 3.2 m³ (4.2 yd³), equipped with a T200 vibrator of 0.25 HP (0.19 kW) to facilitate material discharge. Includes Hoppertop dust collector filter by WAM and Ø 10” butterfly valve with pneumatic actuator by WAM. Equipped with guiding sleeve to the discharge chute and weighing system with load cells by Rice Lake or Revere Transducers, with summing box for cement dosing. Includes ladder, walkways, and perimeter handrails for access to the cement scale. Metal Structure: Manufactured from ASTM A36 steel with epoxy primer and polyurethane topcoat. Includes DOMAT corporate color and decals. Pneumatic System: Consists of a 7.5 HP (5.6 kW) compressor (exclusive use for the plant), brand Quincy, and Festo solenoid valves with fittings and hoses for actuation of the aggregate hopper gates and cement scale butterfly valve. Water Line: Galvanized pipe Ø 3”, equipped with ball valve, check valve, electromagnetic flow sensor by Badger Meter, and connection hose to the mixer. Includes self-priming pump of 6 HP (4.5 kW) with Weg or Siemens motor, 3” x 6 m suction hose, and foot valve. Washing Line: 1 HP (0.75 kW) washing pump with 1” x 6 m suction hose and 18 m washing hose. Power Cabinet: IP55-rated protective cabinet with main meter and distribution block for motor power supply with grounding bar. Includes motor protectors and contactors by Siemens or ABB, and variable frequency drive (for weighing belt) by Siemens or ABB. Supplied with internal wiring and routing ducts. Operating voltage: 440 VAC. Power connections not included. Control System: Insulated control cabin (must be installed within 10 meters of the plant), equipped with D200 system. Console with dedicated PC, monitor, keyboard, and mouse; Siemens S7-1200 PLC; and specialized software for automatic dosing, consumption monitoring, and inventory traceability. Includes manual push buttons, emergency stop button, weight indicators (for weighing belt and cement scale), digital flowmeter for water dosing, digital hour meter, and UPS for backup. Control voltage: 110 VAC. Power connections not included. Note: Cement screw conveyor not included. Transport: By flatbed trailer or container.