DOMAT DMC 100 Continuous Batching and Mixing Plant Aggregate Hoppers: Rack with three aggregate hoppers, each with a capacity of 8 m³ (10.47 yd³). Includes 0.25 HP (0.19 kW) T200 vibrators on the sand hoppers. Each hopper is fitted with an individual dosing belt driven by 5 HP (3.73 kW) gear motors, brand Sumitomo or SEW. Each belt includes an independent weighing system with load cells by Rice Lake or Revere Transducers. Horizontal Belt Conveyor: 24” wide horizontal conveyor with smooth belt, equipped with a 7.5 HP (5.59 kW) gear motor, brand Sumitomo or SEW, with chain coupling. Includes carrying, return, and self-aligning rollers; drive drum and tensioning tail drum; rubber side guides; and lubrication points for pedestal bearings and tensioners. Inclined Belt Conveyor: Inclined conveyor with 30” smooth belt, equipped with a 10 HP (7.46 kW) gear motor, brand Sumitomo or SEW, with chain coupling. Includes carrying, return, and alignment rollers; drive and self-cleaning tail drums with tensioning system; material guide at belt inlet; lubrication points for pedestal bearings and tensioners; and aggregate discharge chute to the mixer. Cement Weighing Scale: Cement scale with a capacity of 1.5 m³ (1.96 yd³), equipped with a 0.25 HP (0.19 kW) T200 vibrator to facilitate material discharge. Includes WAM Hoppertop dust collector filter and integrated screw conveyor for discharge to the chute, driven by a 10 HP (7.46 kW) gear motor, brand Sumitomo or SEW. Fitted with directional sleeve at the discharge chute and weighing system with load cells by Rice Lake or Revere Transducers, with summing box for cement dosing. Base Chassis: Chassis structure supporting the mixer, conveyors, aggregate hoppers, and cement scale. Includes integrated mobility through two 4-axle trucks with 22.5” rims, each with a load capacity of 20,000 lb. Features height-adjustable stabilizing legs and support towers for the working position of the plant. Metal Structure: Fabricated in ASTM A36 steel, with epoxy primer and polyurethane paint finish. Includes DOMAT corporate color and branding decals. Water Line: Galvanized pipe Ø2”, equipped with ball valve, check valve, electromagnetic flow sensor by Badger Meter, and hose connection to the mixer. Includes 2 HP (1.49 kW) self-priming pump with Weg or Siemens motor, Ø2” x 6 m (Ø50.8 mm x 19.69 ft) suction hose, and foot valve. Washing Line: 1 HP (0.75 kW) washing pump with Ø1” x 6 m (Ø25.4 mm x 19.69 ft) suction hose and 18 m (59.06 ft) wash hose. Continuous Mixer: SICOMA MAO/C100 continuous mixer, designed for 3000 PSI concrete. Production capacity: 180–200 Ton/h. Includes inspection gates on the lid with anti-drip rubber seals. Driven by one 30 HP (22.37 kW) motor coupled to two epicyclic-type gear reducers. Bottom lining with 8 mm (0.31 in) thick wear-resistant steel panels, and side lining with 10 mm (0.39 in) panels of the same material. Includes 40 mixing arms and 8 scraper arms made of high-hardness steel, with 48 mixing and scraping paddles made of 20 mm (0.79 in) thick high-chromium steel, distributed over two mixing shafts. Includes discharge gate. Fitted with a centralized automatic lubrication system, alarm panel for monitoring motor and reducer temperature, oil level control, and pressure monitoring of the lubrication system. Cement discharge buffer tank not included. Power Cabinet: IP55-rated protection cabinet with main totalizer, distribution block for motor electrical supply, and ground busbar. Includes motor protectors and contactors by Siemens or ABB, independent totalizer, soft starter (for mixer motor), and frequency inverter (for dosing belts), brand Siemens or ABB. Includes internal wiring and cable ducts. Operating voltage: 440 VAC. Electrical main connections not included. Control System: Insulated control cabin (must be installed within 10 meters of the plant), equipped with D200 system. Console includes dedicated PC, monitor, keyboard, and mouse; Siemens S7‑1200 PLC; and specialized software for automatic batching, consumption monitoring, and inventory traceability. Includes manual pushbuttons, emergency stop button, weight indicators (for dosing belts and cement scale), water dosing liter counter, mixer motor ammeter, digital hour meter, and UPS for backup. Control voltage: 110 VAC. Electrical main connections not included. Note: Cement screw conveyor not included. Transport: Designed for towing by a semi-trailer truck (tractor unit).